The Sprinter-HD camera is ideally suited for industrial applications. What makes these cameras user-friendly is a number of standard interfaces but particularly the availabilitly of standard lens attachments.
For microscopy applications or for optimal adjustment of the object size to the sensor size. C-Mount lenses are low priced and due to their wide aperture particularly suitable for applications with high image refresh rates (frames per second).
Allows using widespread Nikon-F lenses with mechanically adjustable aperture ring. Many fixed Focus models are available but also various zoom models.
For standard applications with Nikon G-mount lenses. The aperture is adjusted using the ring located on the mount.
Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
The Sprinter-HD is equipped with an 16 GB ring memory. After starting recording, the camera stores the image sequence continuously. After triggering, recording continues for a set time. This allows some response time for the exernal trigger detection sytsem.
Using the 16 GB memory, it can store the recording over a period of 4 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process.
There are several connections on the aluminium camera housing:
Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)
High download speeds from the image memory to the memory of the connected PC
Parallel monitoring during recording
- External trigger and synchronization interface
Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
Plugin for a SSD harddisk
