SVS-VISTEK

The ON Semiconductor KAI-47051 CCD sensor boasts a 5.5 µm pixel pitch, 56.7 mm image diagonal and 7 frames/second at maximum data rate.

The SHR features an M72 lens mount. The short flange back distance of 19.55 mm allows individual adaptation of high performance lens systems for virtually any task. Our guarantee for the best results with this sensor.

Model	MP	Resolution [Pixel]	Sensor	Sensor Size	Frame rate	Chroma	Mount	Interface
shr47051CCL	47	8856 x 5280	KAI-47051-F / ON Semiconductor	Medium Format	7fps	color	M72x0.75	Camera Link Medium
shr47051CCX	47	8864 x 5280	KAI-47051-F / ON Semiconductor	Medium Format	7fps	color	M72x0.75	CXP-6 2 Lanes
shr47051MCL	47	8856 x 5280	KAI-47051-A / ON Semiconductor	Medium Format	7fps	mono	M72x0.75	Camera Link Medium
shr47051MCX	47	8864 x 5280	KAI-47051-A / ON Semiconductor	Medium Format	7fps	mono	M72x0.75	CXP-6 2 Lanes

SHR-series camera properties

• 47 + X megapixel at optimized frame rates
• Sensors by ON Semiconductor
• Progressive Scan CCD
• Monochrome and color versions (Bayer mosaic)
• 512 MB on-board memory
• 14 bit digitization, transmitted as 8 or 12 bits
• M72 lens mount (19.55 flange back distance)
• 80 x 80 x 45 mm³
• CCD tap balancing  - auto/manual
• User defined defect pixel correction
• Area of Interest/Partial Scan
• Read Out Control – manual/delayed
• White Balance – auto/manual (color versions)
• Exposure control: trigger manual/auto/external
• Signal safe: Schmitt-trigger, debouncer and prescaler
• Manual Gain
• Look Up Table
• Integrated temperature sensor
• Industrial I/O Concept: Up to 24V signal levels and RS232
• 1 x galvanically isolated input
• LED control uo to 2x
• Logic trigger functions
• Sequencer – up to 16 individual Intervals (exposure and LED)
• 4 pulseloop modules generate signals for exposure, LED or triggering
• Pulse width modulation, high frequency - PWM
• Power supply 10 – 25 VDC
• GenICam compliant

 

Camera Link properties

• Camera Link data interface
• Pixel clock setting
• Power over Camera Link (PoCL)

 

CoaXPress properties

• Quad CoaXPress (up to 4 x 6,25 Gbit/s)
• Cable length up to 200 meter

SVCam-SHR CoaXPress
Applications demanding speed, throughput and efficiency are the ideal match for the SHR with CoaXPress interface, delivering cost efficient quality. For the inspection of semiconductors, solar panels and flat panel displays, the full seven frames/second of the SHR with CXP gives you the leading edge, paving your way to success.
SVCam-SHR Camera Link
The SHR with Camera Link interface is first choice for enhancing existing applications. With its 47 megapixels it opens up new dimensions in throughput alternatlvely for rendering fine details. When it comes to quality control of wafers, solar panels, flat panel displays or other large surfaces in the semiconductor or consumer goods industries, the SHR is the ideal camera.